In Australia and New Zealand, the grid code is notoriously strict. The password for AS/NZS 4777.2:2020 is public. However, based on industry feedback, the following process works:
| Step | Action | Software | |------|--------|----------| | 1 | Connect to the inverter via VE.Bus (for MultiPlus/Quattro) or VE.Direct (for smaller inverters). | VictronConnect (v5.30+) or VE.Config | | 2 | Navigate to (or “Grid” tab in VE.Config). | | | 3 | Select the desired country/standard from the dropdown (e.g., “Germany VDE-AR-N 4105”). | | | 4 | If prompted for a password , enter the VE.Config password (default: 000000 ). | | | 5 | If password is incorrect/unknown → perform a factory reset using VE.Bus System Configurator (not covered in this brief). | | grid code password victron
Victron restricts this password primarily for . Incorrect grid settings can lead to: Grid code password? - DIY - Victron Community In Australia and New Zealand, the grid code
Usually you can set it the first time it is programmed with no password. Or you can contact either a local supplier or dealership. Victron Energy UK Grid Code - VictronEnergy | VictronConnect (v5
Would you like this formatted as a sticker template, PDF note, or included in a commissioning sheet?
